Dr. Anup Ghosh

Department of Aerospace Engineering

Indian Institute of Technology Kharagpur

Ph:+91-3222-2-83010(O)

     +91-3222-2-83011(R)

Back To Main Page

Publication





1. A. Ghosh and P. K. Sinha,"Stress and Displacement Behaviour of Damaged Laminated Composite Plate Under Bending", Journal of the Institute of Engineers (India), vol. 83, pp. 55-63, 2002. 
   
2. Anup Ghosh and P. K. Sinha, "Initiation and Propagation of Failure in Damaged Laminated Composites due to Impact Loading", Plasticity and Impact Mechanics : Proceedings of 8th International Symposium on IMPLAST 2003. New Delhi : Phoenix Publishing House Pvt. Ltd., pp. 696-703, 2003.
3. Anup Ghosh and P. K. Sinha, "Initiation and Propagation of Damage in Laminated Composite Plate Under Dynamic Loading", Proceedings of 54th AGM & International Seminar On Indian Aviation-Challenges & Perspectives, Aeronautical Society of India, Paper No. 21, 2003.
4. Anup Ghosh and P. K. Sinha, "Dynamic and Impact Response of Damaged Laminated Composite Plates", Aircraft Engineering and Aerospace Technology. vol. 76 (1), pp - 29-37, 2004.
5. Sharad Tripathi, Arun Murthy, Alain Hodin, K. Suresh, Anup Ghosh, "Shock wave Propagation due to Methane-Air Mixture Explosion and Effect on a Concrete Enclosure", CNRI AFTP/CEPM/GEP Conference on Petrol & Gas, 2010, Bourges, October 2003
6. Anup Ghosh and P. K. Sinha, "Initiation and Propagation of Failure in Clamped and Simply Supported Damaged Laminated Composites due to Impact", Third International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 28-30, 2004.
7. Anup Ghosh and P. K. Sinha, "Initiation and Propagation of Damage in Laminated Composite Shells due to Low Velocity Impact", International Journal of Crashworthiness. Vol. 10(4), pp. 379-388, 2005.
8. Anup Ghosh, "Hygrothermal effects on the initiation and propagation of damage in composite shells" Aircraft Engineering and Aerospace Technology, 80(4) (2008)
9. Kerur, S.B. and Ghosh, A., "Active Control of Geometrically Nonlinear Transient Response of Smart Laminated Composite Plate IntegratedWith AFC Actuator and PVDF Sensor", Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 28 - October 1, 2010, Philadelphia, Pennsylvania, USA, SMASIS2010, 3647.
10. Kerur, S.B. and Ghosh, A., "Vibration Control of Geometrically Non-Linear Composite Smart Plate with AFC Actuator and PVDF Sensor", Proceedings of International Conference on International Conference on  Vibration Engineering & Technology of Machinery, December 13-15, 2010, IIT Delhi, VETOMAC-VI-AB00124.
11. Kerur, S.B. and Ghosh, A., "Geometrically Nonlinear Transient Response of Active Fiber Composite Smart Plate", Proceedings of International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 27-29, 2010, IIT Kharagpur, India, ICTACEM -2010/257.
12. Kerur, S. and Ghosh, A., "Active vibration control of composite plate using AFC actuator and PVDF sensor"   International Journal of Structural Stability and Dynamics, 11 (2011)
    
13. S. B. Kerur and A. Ghosh, "Active Control of Geometrically Non-linear Transient Response of Smart Laminated Composite Plate Integrated With AFC Actuator and PVDF Sensor",  Journal of Intelligent Material Systems and Structures, 22, pp 1149-1160 (2011)
14. Shravankumar B. Kerur and Anup Ghosh, "Geometrically Nonlinear Bending Analysis of Piezoelectric Fiber Reinforced Composite (MFC/AFC) Cross ply Plate under Hygrothermal Environment", Journal of Thermal Stresses, 36, pp 1255 -1282, 2013.
15. Ramesh Kumar M and Anup Ghosh, "Effect of Porosity on Inter Laminar Shear Strength in carbon/epoxy composites, Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 29-31, 2014.
16. Ramesh Kumar. M, Anup Ghosh, Karuppannan.D, Ramesh Sundaram, "Numerical and Experimental Studies of Porosity on Aerospace Grade Advanced Composites", International Conference on Aeromechanical Materials for Manufacturing, July 7-9, 2016. 
17. Ghosh A., Gupta A., "Bending analysis of laminated and sandwich composite reissner-mindlin plates using nurbs-based isogeometric approach", The 11th International Symposium on Plasticity and Impact Mechanics IMPLAST 2016, December 11-14, 2016.
18. Ramesh Kumar. M, Anup Ghosh, Karuppannan.D, Ramesh Sundaram, "Numerical and Experimental Studies of Porosity on Aerospace Grade Advanced Composites", Materials Today: Proceedings, v-4, Iss-8, pp- 8697-8705, January, 2017
19. Ghosh A., Gupta A., "Transient Analysis of Anti-symmetric Cross-Ply and Angle-Ply Laminated Composite Plates Using Nurbs-Based Isogeometric Analysis", 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Science and Technology Forum and Exposition 2017, January 9-13, 2017.
20. Panda M., Hari Om Verma , Peyada N. K., Ghosh A., "Design and Fabrication of Alpha-Beta Vane for Small UAV Application", NATIONAL CONFERENCE ON WIND TUNNEL TESTING(NCWT-05), March 16-17, 2017. 
    
21. Ghosh A., Kumar M. R., Karuppannan D. , Sundaram R., "Experimental Investigation of Aerospace Grade Composites Porosity Laminates Under Hygro-Thermal Environment condition", Journal of Aerospace Science and Technology, v-69, p36-46, Feb 2017.
22. Ghosh A., Gupta A., "Bending Analysis of Laminated and Sandwich Composite Reissner-mindlin Plates Using Nurbs-based Isogeometric Approach", Procedia Engineering, v-173, p1334-1341, 2017.
23. Tuhin Bandopadhyay, Shashank Gandhi, N. K. Peyada, A. Ghosh; "Handheld FFT Analyser"; 7th The International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), December 2017. ID- 212.
24. Supen Kumar Sah, Anup Ghosh, Chetan S Mistry; "Structural and Vibration Analysis of High Aspect ratio Low Speed Contra-Rotating Fan Stage"; 7th The International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), December 2017. ID- 401.
25. Ramesh Kumar. M, Anup Ghosh, Karuppannan. D, Sakthi Sathya. P, Ramesh Sundaram; "Destructive and Non-Destructive Analysis of Adhesively Bonded Composite `T' Joints"; International Conference on Composite Materials and Structures (ICCMS), December 2017.
    
26. Ramesh Kumar. M, Anup Ghosh, Karuppannan D, "Numerical and Experimental Characterization of Composite Secondary Bonded Adhesive Lap Joint using Ultrasonics method"; Mechanics of Composite Materials, Vol. 54, Issue. 2, pp - 257-268, January, 2018.
    
27. Vikas Kaushik & Anup Ghosh, "XIGA based intralaminar and translaminar fracture analysis of unidirectional CFRP laminate", American Society for Composites, 33rd Technical Conference, September 24-27, 2018, Morif Hotel, Seattel, WA, USA. DOI: 10.12783/asc33/26049
28. Vikas Kaushik & Anup Ghosh, " Fatigue life estimation and crack propagation analysis of orthotropic lamina using XIGA methodology ", Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2018.1472324. 
29. Abha Gupta & Anup Ghosh, "Static And Transient Analysis Of Sandwich Composite Plates Using Isogeometric Analysis", Mechanics of Advanced Materials and Structures, Online publication on 3 January, 2019. DOI: 10.1080/15376494.2018.1534169.     
30. Abha Gupta & Anup Ghosh, "Nurbs Based Thermo-Elastic Analyses Of Laminated And Sandwich Composite Plates", Sadhna, Vol-44, No-4, pp-84, 21 March, 2019. DOI: 10.1007/s12046-019-1063-7. 
31. Vikas Kaushik & Anup Ghosh, "Experimental and numerical characterization of Mode I fracture in unidirectional CFRP laminated composite using XIGA-CZM approach" Engineering Fracture Mechanics, V-211, pp- 221-243, January 2019, online publication on 14 February 2019, https://doi.org/10.1016/j.engfracmech.2019.01.038
32.  Nagappa Siddgonde, Anup Ghosh, "Thermo-mechanical Modelling of 5-harness Satin Weave C/C Composites at High Temperature",  9th International Conference of Materials Processing and Characterization, ICMPC-2019, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad, India,Papere Id - 1349, Held on 8-10 March, 2019. Materials Today: Proceedings, v-18, Part-7, pp- 4011-4020,  2019 https://doi.org/10.1016/j.matpr.2019.07.343
    
33. Abha Gupta and Anup Ghosh, "Isogeometric static and dynamic analysis of laminated and sandwich composite plates using nonpolynomial shear deformation theory" , Composites Part B , First published version available online: 13-AUG-2019, Vol- 176,  DOI information:  https://doi.org/10.1016/j.compositesb.2019.107295.
    
34. Nagappa Siddgonde and Anup Ghosh," Thermo-mechanical Modeling of 3D Woven Fabric Composites Using Two-step Homogenization Approach
    " ,  IMECE®, International Mechanical Engineering Congress & Exposition®, Calvin L. Rampton Salt Palace Convention Center, Salt Lake City, Utah, November 11 – 14, 2019.
    
35. Vikas Kaushik & Anup Ghosh, "Experimental and numerical investigation of Mode-I & Mode-II fatigue crack growth in unidirectional composites using XIGA-CZM approach " International Journal of Fatigue, Vol - 134, May 2020, Accepted for Publication, 26 Dec 2019. Published online on 7 January, 2020, DOI: https://doi.org/10.1016/j.ijfatigue.2019.105461 .
    
36. Nagappa Siddgonde & Anup Ghosh, " Thermo-mechanical modeling of C/C 3D orthogonal and angle interlock woven fabric composites in high temperature environment
    " Mechanics of Materials, Vol - 148, September 2020, 103525.  Accepted for Publication, 25 June 2020. Published online on 27 June, 2020, DOI: https://doi.org/10.1016/j.mechmat.2020.103525 .
    
37. Manabesh Panda, N.K. Peyada, Anup Ghosh , "Saturated adaptive backstepping control of uncertain nonlinear systems with validation using twin rotor system" Journal of the Franklin Institute, Vol - 357, Issue - 18, 13477-13510, Published online on 15 November, 2020, DOI: https://doi.org/10.1016/j.jfranklin.2020.10.003 
    
38. Vikas kaushik & Anup Ghosh, " Experimental and XIGA-CZM based Mode-II and mixed-mode interlaminar fracture model for unidirectional aerospace-grade composites" Mechanics of Materials, Vol - 154, March 2021, 103722.  Accepted for Publication, 17 December 2020. Published online on 29 December, 2020, DOI: https://doi.org/10.1016/j.mechmat.2020.103722
    
39. Vikas kaushik, H. N. Bar & Anup Ghosh, "Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites" Thin-Walled Structures, Vol - 161, April 2021, 107431. DOI: https://doi.org/10.1016/j.tws.2020.107431
    
40. Supen Kumar Sah and Anup Ghosh, "Free Vibration and Buckling Analysis of FGM plates using Inverse Trigonometric Shear Deformation Theory" Aircraft Engineering and Aerospace Technology, Vol - 93, Number - 2, 298-310.  19 March 2021.    http://dx.doi.org/10.1108/AEAT-01-2020-0001      
    
41. Supen Kumar Sah and Anup Ghosh, "Effect of Porosity on the Thermal Buckling Analysis of Power and Sigmoid Law Functionally Graded Material Sandwich Plates Based on Sinusoidal Shear Deformation Theory", International Journal of Structural Stability and Dynamics -- Accepted (5 October, 2021).
42. Supen Kumar Sah and Anup Ghosh, "Influence of Porosity Distribution on Free Vibration and Buckling Analysis of Multi-Directional Functionally Graded Sandwich Plates ", Composite Structures, Vol - 279, January 2022, 114795,  https://doi.org/10.1016/j.compstruct.2021.114795 
    
43. Supen Kumar Sah and Anup Ghosh, "Thermal Buckling Behavior of Power and Sigmoid Functionally Graded Material Sandwich Plates Using Non-Polynomial Shear Deformation Theories ", Engineering Computations,  -- Accepted (2 November, 2021) https://doi.org/10.1108/EC-05-2021-0306 
    
44. Kartikeswar Dwibedy and Anup Ghosh, "Damage analysis of multi-layered composite structures" Proceedings of International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 20-22, 2021, Department of Aerospace Engineering, IIT Kharagpur, India, ICTACEM -2021; https://doi.org/10.1201/9781003324539-36.  
    
45. Abha Gupta, Surendra Verma and Anup Ghosh, "Static and Dynamic NURBS-based Isogeometric Analysis of Composite Plates Under Hygrothermal Environment", Composite Structures, Vol -- 284, 15 March 2022.  https://doi.org/10.1016/j.compstruct.2021.115083 .  
    
46. Vikas Kaushik, Nagappa Siddgonde, Fumio Narita, Anup Ghosh,  "Mode-I fracture control of unidirectional laminated composites using MFC actuators", Journal of Intelligent Material Systems and Structures, Accepted on 25 February, 2022,First Published April 5, 2022, https://doi.org/10.1177/1045389X221088032 . 
    
47. Nagappa Sidgdonde and Anup Ghosh, "Two-step homogenization of 8-harness satin weave composite considering void defects", TEXCOMP-14 CONFERENCE, 14-16 SEPTEMBER 2022, KYOTO, JAPAN.     
    
48.  Sheetal and Anup Ghosh, "Free Vibration Analysis of Thin Membranes using EFGM",    PA0176,  Proceedings of 67th International Congress of ISTAM,  14-16th December, 2022, Indian Institute of Technology Mandi, Himachal Pradesh, India.
    
49. Supen Kumar Sah and Anup Ghosh, "Buckling Analysis of Porous Uni-Directional Functionally Graded Material Sandwich Plate using Sinusoidal Shear Deformation Theory", International Conference on Applied Mathematics and Mechanics (ICAMM 2023), October 18-20, 2023, Indian Institute of Technology Indore, Madhya Pradesh, India.   
50. Supen Kumar Sah and Anup Ghosh, "Effect of Bi-Directional Material Gradation on Thermo-Mechanical Bending Response of Metal Ceramic FGM Sandwich Plates Using Inverse Trigonometric Shear Deformation Theory”, International Journal of Structural Integrity, Accepted on 25 March, 2024; Published on 13 May 2024, Vol. 15 No. 3, pp. 561-593. https://doi.org/10.1108/IJSI-02-2024-0016 
    
51. Nagappa Siddgonde, Vikas Kaushik, Anup Ghosh,  "Experimental and numerical characterization of E-glass/epoxy plain woven fabric composites containing void defects", Aerospace Science and Technology, Accepted on 10 November, 2024, Volume 155, Part 3, December 2024, 10973, https://doi.org/10.1016/j.ast.2024.109731. Free Download till 5 Jan, 2024.  
    
52. Kamal Kishor Prajapati, Akshay Rai, Agam Sharan, Sumanth Yegurla, Anup Ghosh, Mira Mitra, "A Deep Learning Framework for Guided Wave-Based Structural Health Monitoring of a Composite Plate", AIAA SCITECH 2025 Forum, Paper No. AIAA-2025-1804, 6 to 10 January, 2025, Orlando, FL, USA.  
    
53. Supen Kumar Sah and Anup Ghosh, "Thermo-Mechanical Bending of Power and Sigmoid FGM Sandwich Plate Using Sinusoidal Shear Deformation Theory”, Journal of Reinforced Plastics and Composites, Accepted for publication on 23 January, 2025, https://doi.org/10.1177/07316844251325363, Published on 26 March, 2025.
    
54.  Kamal Kishor Prajapati, Anup Ghosh and Mira Mitra, "Semi-supervised generative adversarial network (SGAN) for damage detection in a composite plate using guided wave responses", Mechanical Systems and Signal Processing, Volume 232, 1 June 2025, 112686.
    
55. Kruthika K C, Anup Ghosh, "Progressive Damage Modeling of Open-Hole Composite Laminate", IMECE-INDIA2025, Paper No. IMECE-India2025-160693, 10 - 13 September, 2025, Hyderabad, India, https://imece-india.secure-platform.com/a/solicitations/255/sessiongallery/20850/application/161142.
    
56. Reshma G, Prathmesh Joshi, Venkata Ramakrishna V, Rajakumaran C, S. Sankaran, Rajarajan A, Anup Ghosh, "Fatigue Life Estimation of Notched Beam under Random Vibrations using Strain Gauge Data", AIAA SciTech 2026, Paper No.- 4355075, 12-16 January, 2026, Orlando, Florida, USA.          
    

            Patents

1. Anup Ghosh, Naba Kumar Peyada and Manabesh Panda; "A MULTI-COMPONENT FORCE MEASUREMENT AND DATA ACQUISITION SYSTEM",  Ref. No. / Application No. 201831009792, Published on 20/09/2019, Patent No. 535272.
   
2. Anup Ghosh, Naba Kumar Peyada and Aditya Pahuja; "SMART INTERACTIVE INFORMATION DISPLAY SYSTEM", Ref. No. / Application No. 201831044187, Published on 29/05/2020, Patent No. 524177.

      Edited Volume

1. Aerospace and Associated Technology, Proceedings of the Joint Conference of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), Asian-Pacific Conference on Aerospace Technology and Science (APCATS), Asian Joint Symposium on Aerospace Engineering (AJSAE), and Aeronautical Society of India (AeSI), December 20-22, 2021. Edited by Anup Ghosh, Kalyan Prasad Sinhamahapatra, Ratan Joarder and Sikha Hota. https://doi.org/10.1201/9781003324539.